MCSPECIAL MCS901 Rear Control Arms Links Mini Boots Boots.slightly Irregular

( Brand: Mcspecial ), ( Manufacturer Part Number: MCS901 ), ( Part Type: Control Arm Boot ), ( Placement On Vehicle: Left )

Review MCSPECIAL Adjustable Rear Control Arms Links Mini Boots.slightly Irregular fits COOPER

The MCS901 Rear Control Arms Links for Mini Cooper Boots from MC Special are designed to provide superior performance and reliability for your vehicle. These control arms links are manufactured with high-quality materials and precise engineering to ensure a perfect fit and optimal functionality.

The MCS901 control arms links are slightly irregular, which adds a unique touch to your Mini Cooper. The irregularity is not a manufacturing defect but rather a deliberate design choice that sets these links apart from the standard, mass-produced parts. This irregularity gives the links a distinctive appearance, making your Mini Cooper stand out from the crowd.

The MCS901 control arms links are made from durable, lightweight materials that are resistant to corrosion and wear. They are designed to withstand the rigors of daily driving, providing excellent stability and handling. The links are also adjustable, allowing for easy installation and customization to fit your specific Mini Cooper model.

The MCS901 control arms links are compatible with Mini Cooper Boots, making them an excellent choice for those looking to upgrade their vehicle's suspension system. The links are easy to install, requiring no special tools or expertise. With clear installation instructions included in the package, you can install the links yourself in no time.

In conclusion, the MCS901 Rear Control Arms Links for Mini Cooper Boots from MC Special are a great choice for those looking to enhance their vehicle's performance and appearance. The unique, slight irregularity of these links adds a distinctive touch to your Mini Cooper, while the durable materials and adjustable design ensure optimal functionality and reliability. With easy installation and clear instructions, these control arms links are a must-have upgrade for any Mini Cooper owner.

1. Potential cost savings: Since these are slightly irregular, they may be priced lower than their perfect counterparts.

2. Availability: Irregular parts may be more readily available than new, perfect parts, especially for older models or hard-to-find parts.

3. Functionality: As long as the irregularities do not affect the performance or safety of the part, they should function just as well as a new part.

1. Uncertainty: It's difficult to know exactly what irregularities exist without inspecting the parts in person. This could lead to issues down the line if the irregularities affect the part's performance or longevity.

2. Warranty: Irregular parts may not come with the same warranty coverage as new parts. This could mean paying for repairs or replacements out of pocket if the part fails.

3. Quality: While MCS is a reputable brand, the quality of irregular parts may not be as high as that of new, perfect parts. This could lead to issues with fitment, durability, or performance.

Conclusion: Buying slightly irregular MCS901 Rear Control Arms Links for Mini Cooper can save you money and potentially get you the part you need faster. However, the potential risks of buying irregular parts, such as uncertainty about their performance and lack of warranty coverage, should be considered. If the savings are significant and you're comfortable with the potential risks, then buying irregular parts may be a worthwhile option. If not, it may be better to invest in new, perfect parts. Ultimately, the decision should be based on your budget, your comfort level with the potential risks, and your need for the part.

Details:

One set of two 2 adjustable rear control arm links with protective rod-end boots for mini Cooper the tubes were cut a little short. These rod ends are rated slightly in excess of 27,000lbs static radial load. The rod-end boots are a tough, flexible neoprene rubber.

The threads have been pre-treated with anti-seize compound to insure easy adjust ability in future. Instructions are included. The rod ends, while self-aligning have added benefit of having no give, unlike factory rubber bushings.

This is mounted on the upper drivers side arm. The rod-ends bearings are nylon-composite-lined to assure good self-lubrication and should be maintenance free. Therefore these arms should not be length need beyond the original factory length . The arms are pre-adjusted to factory length , but can be shortened provide rear wheel camber you want.

This enables you to adjust camber only. These fit all model's due to design of the mini, you can use in either upper or lower position, both. 4mm wall steel tubing.

Easy to install. Even if you leave these arms at the factory settings, will notice a difference when aggressively cornering. 4mm diameter x. The maximum recommended length on these arms is 532mm.

If only installing one set, most people usually replace the factory lower arms. The boots come pre-installed and pre-packed with a high load, water-resistant Molly grease. They can be adjusted shorter however, to correct excessive camber on lowered minis these arms, are constructed of 1 inch 2.

It takes about an hour per set, needing only common hand tools and the appropriate jacks. They are resistant to gasoline and most oils greases. And they are replaceable should get damaged at some future time. With the boots and pre-applied grease, future lubrication, except in most severe conditions, should not be needed.

The factory center-to-center hole distance is 532mm, or about inches. At about 5lb 12 oz set, they are one pound lighter than the factory arms.

specifications camberkitie:

• for models: Cooper
• brand: Mcspecial
• mpn: Mcs901
• part type: Control Arm Boot
• placement on vehicle: Left

Seller camberkitie:

• city: Omaha, Nebraska
• zipcode: 68152

Returns camberkitie:

• details: Restocking fee: No
• paid by: Buyer
• time: 30 Days
• type: Money Back
• policy: returns accepted

Offer camberkitie:

• Started: December 14, 2017, 8:24 am
• best offer: false
• Sold: 0
• bids: 0
• quantity: 1

Payments camberkitie:

• PayPal

Ratings:

1. Great Seller, Excellent Communication, Fast Shipping, A 12-05-17
2. Excellent seller,item as described,fast shipping 12-13-17
3. Excellent ! Super Fast Payment ! Super Smooth Transaction ! AAAAA 12-08-17
4. A A A 12-02-17
5. Thank you for your service. 12-13-17

General camberkitie:

• in stock: Yes
• Motors > PartsAccessories > CarTruck Parts > SuspensionSteering > Caster > Camber Kits
• condition: New

Shipping camberkitie:

• type: Flat
• handling: 1 days
• cost: $0.0

Mcspecial MCS901 Is Similar To:

• Mcs921 Part Mini Cooper Gen Tower Saver Reinforcement Plates Mcspecial (28% similar) These are constructed of 7GA all necessary hardware and instructions are included. St gen plates. They sandwich in-between the bottom of tower and strut bearing mount. If this is your situation, you'll want to install a set of these tower savers. 5MM steel just like. Installation is very easy, ...(April 9th, 2018)
• Mcs9nn Part Mini Cooper Gen Tower Reinforcement Plates Mcspecial (27.7% similar) A gap of 4-6MM is not unusual. As you might expect, this does adversely affect your front-end alignment, well the vehicles handling. The towers should be almost flat across top. You can probably discern the deformation with naked eye, but to be sure, place a straight-edge across top of tower. The ...(March 19th, 2018)
• Mcs906 Mcspecial Inc Rod End Replacements Ford Focus Adjustable Rear Toe Control Arms Links (37.5% similar) And they are replaceable should they get damaged at some future time. The rod ends bodies are high strength chrome Molly steel. With the boots and the pre applied grease, future lubrication, except in the most severe conditions, should not be needed. Instructions are included. They can be left this ...(June 28th, 2016)
• Mcspecial Inc Mcs900 Mini Cooper Strut Tower Reinforcement Plates Ft02-06 R50 r53 30 Sets With Fasteners (23.9% similar) I recommend that you start with the rearmost nut. The listing that I have used for years is below. You can probably discern the deformation with naked eye, but to be sure, place a straight-edge across top of tower. This occurs because the sheet-metal used to construct towers is too light of gauge. ...(January 1st, 2025)